Eyepieces for 8" SCT
TeleVue.com: Advice Article List > Eyepieces for 8" SCT
Albert Nagler
CEO, Tele Vue Optics

If you have an 8" f/10 SCT with the 1¼" diagonal, as I've had since the early '70s, you can simplify your eyepiece collection while gaining dramatically better viewing experiences with a few Tele Vue eyepieces.

You basically need only 3 eyepieces to cover the range from low power with maximum field to high power for planetary viewing.

For low power viewing, you may already have a 25mm or 26 mm Plössl eyepiece that came with the scope. These will likely give you a fairly decent image and field of view with a 1¼" diagonal. But the superior coatings, construction and edge sharpness of Tele Vue's 32mm Plössl will yield better performance, especially for those who wear eyeglasses and need long eye-relief. If you must wear glasses to correct astigmatism and know the astigmatism value, it's best to call Tele Vue for specific advice. However, you can gain maximum field, sharpness and contrast with a wonderful 68° field by using the 24mm Panoptic. The expansive view, darker sky background and higher magnification yields more detail and more exciting low power viewing.

Note, you can further dramatically increase low power viewing by adding the 2" Everbrite mirror system with its 1/10 wave, 99% reflective broadband dielectric coating. With appropriate 2" Tele Vue eyepieces, your maximum field can be increased from 0.76° to 1.3°, (three times the area). If you stay with a 1" diagonal, you may find that replacing your stock 1" prism or mirror diagonal with a 1¼" Tele Vue Everbrite diagonal will give noticeably sharper, brighter images.

At medium and high power viewing, 82° Nagler or 100° Ethos eyepieces yield "spacewalk" viewing for open and globular star clusters, planetary nebula, and galaxies.

And for high power viewing you'll see more field viewing the moon, planets such as Jupiter with its entourage of moons using Nagler and Delos eyepieces, all with far more comfortable eye-relief than the "peep-hole" eyepieces usually supplied with your scope.

    Power Field
1. Low Power, Maximum Field for 1¼" Diagonal Either 32 Plössl
or 24mm Panoptic
1a. Low Power, Maximum Field for 2" Diagonal Either 55 Plössl
or 41 Panoptic
or 31 Nagler
2. Medium Power, for 1¼" Diagonal Either 15mm DeLite
or 14mm Delos
or 13mm Ethos
or 13mm Nagler Type 6
2a. Medium Power for 2" Diagonal 17mm Ethos 120x 0.83°
3. High Power for 1¼" or 2" Diagonal* Either 10mm Ethos
or 10mm Delos
or 9mm Nagler Type 6
or 9mm DeLite
  *Use 2" - 1¼" adapter.

You're welcome to call our staff for more in-depth, personal advice to fit your needs and budget. If you have 10" or larger-size SCT's you'll want to discuss the important field size advantages of 2" eyepieces, and the possibility of needing only 2 eyepieces to meet all your needs.

For best eyepiece recommendations, call us at 845-469-4551 (9 a.m. — 5 p.m. ET Monday — Friday) to discuss integrating new eyepieces with your existing collection of eyepieces and scopes, budget requirements, and eyeglass / eyesight implications.

Copyright © 2003-2017 Tele Vue Optics, Inc., 32 Elkay Dr, Chester, NY, 10918 · Call for advice: 1-845-469-4551 (9am-5pm ET) · TeleVue.com